Thursday, April 23, 2020

Science Coursework Essay Example

Science Coursework Essay For my science coursework I have been asked to carry out an experiment to investigate the strengths of different sodium hydroxide solutions. By the end of my experiment I would like to find out which solution would be the best antacid to overcome indigestion. Indigestion is when acid from your stomach flows back up the oesophagus. I will be testing three sodium hydroxide (Na) solutions which have varying strengths, they are labelled A, B and C. To investigate the strength of each alkali I will use 4 different methods to measure the solutions.Phenolphthalein indicator is added to the antacid to turn it pink. Acid is added to the alkali solution to neutralise it. The amount of Acid which is added to each solution will determine the strength ness of it. Neutralisation is an irreversible chemical reaction; this is when an acid is neutralised by an alkali. This kind of chemical reaction produces reactants which are water and salt. The formula for this is: Acid + Alkali Salt + Water.The e quation for this experiment will be:Hydrochloric Acid + Sodium HydroxideHCl (aq) +NaOH (aq) NaCl (aq) +H2O (l)Apparatus:1 x 250cm3 Beaker,1 x 200cm3 Beaker,Pipette Filler,Pipette,Conical Flask,Clamp,Clamp stand,Test tube,Test tube stand,Burette,Measuring cylinder.Sodium Hydroxide solutions A, B and C,Hydrochloric Acid,Phenolphthalein (Indicator),Water.Strategy:In order to make this experiment fair I will be using 4 different methods to measure the acid used to neutralise the antacid solution. I will be using test tubes, beakers, measuring cylinders and the burette/pipette. I will test the equipment to see which method produces the most accurate results. By the end of the experiment I will be able to identify which method is the best and therefore conclude which equipment formed the most precise outcomes.Method 1 (Test Tubes)1. Pour one test tube full of the Sodium Hydroxide into a beaker.2. Add few drops of indicator to turn it pink.3. Add little amounts of HCl from the test tubes, into the solution and wait until it turned colourless.4. Record how many test tubes of HCl it took for the solution to be neutralised.Conclusion of this method:By using this method I found it difficult to record the results accurately. I was unable to control my hand when the acid was being added to the alkali. This made my result unreliable because the correct readings werent taken as the solution turned colourless. Therefore I will not be assessing this strategy as there are many defects and creates unreliable results.Method 2 (Beakers)1. Pour 100cm3 of Sodium Hydroxide in to the smaller beaker.2. Add few drops of indicator to turn pink.3. Use the larger beaker to add the acid to the alkali. Wait till the solution turns colourless.4. Record how much HCl was added to the Sodium Hydroxide.Conclusion of this method:I think this strategy was reasonably reliable as there was more acid in the beaker than the test tube, so I was able to stop as soon as the solution went colourless. Howe ver due to human error I dont think I got completely accurate results. Also as the graduations on the beaker were more spread out, me and my group couldnt tell exactly how much HCl was added to the Sodium Hydroxide. We estimated most of the results for this method. Overall I think this method is undependable as the results wont reflect the true outcomes of the experiment, therefore I will not be assessing this strategy.Method 3 (Measuring cylinders)1. Pour 100cm3 of Sodium Hydroxide into the measuring cylinder.2. Add few drops of indicator to turn pink3. Pour 100cm3 HCl into a measuring cylinder.4. Add HCl to Sodium Hydroxide until it turns colourless. Then record how much HCl was used and take it away from 100cm3Conclusion of this method:I think this method was very accurate because of the amount of graduations of the measuring cylinders. I was able to tell exactly how much acid was needed to neutralise the solutions. This slightly closed the gap for human error as the graduations were more reliable. However, it was difficult to pour acid from one cylinder to the other, sometimes a few drops of solution fell outside the measuring cylinder. This minor problem could affect the outcome of my results, therefore I will not be using this method.Method 4 (Burette Pipette)1. Pour acid into smaller beaker. Pour Sodium Hydroxide into larger beaker.2. Pour acid into the burette up to 0.003. Using the pipette and pipette filler pour 25cm3 of Sodium Hydroxide into a conical flask.4. Add few drops of indicator to turn pink5. Turn the tap of the burette to pour the Acid into the conical flask. Wait till the solution goes colourless.Conclusion of this method:Because of the amount of gradients on the burette, I believe that this is the best method. My results were extremely reliable and I was able to obtain accurate results. There was very little room for human error as the tap enabled me to stop the acid as soon as the solution went colourless. So, I have decided to use thi s method because of the amount of accuracy.Experiment:Method 4 is the overall method I will use as I consider it to be the best experiment to find out which Antacid is the strongest.Here is how to carry out the experiment, step by step:1. Collect all the equipment which is needed-1 x 250cm3 Beaker,1 x 200cm3 Beaker,Pipette Filler,Pipette,Clamp,Clamp stand,Burette,Tile,Goggles,Sodium Hydroxide solutions A, B and C,Hydrochloric Acid,Phenolphthalein (Indicator),Water.2. Clean all the equipment thoroughly with distilled water to clean out any chemicals from previous experiments, (this will need to be done after using each Sodium Hydroxide solutions)3. Pour about 100cm3 of the first solution (A) into a small beaker. Then use a pipette filler to measure out 25cm3 of the Sodium Hydroxide solution. Empty the solution into a conical flask.4. Set up the clamp and stand and secure the burette to the clamp.5. Fill up the burette with acid and make sure there is no air bubble at the bottom by al lowing the acid to run through.6. Record how much acid is in the burette. This will be the starting burette reading.7. Add a few drops of Phenolphthalein to the Sodium Hydroxide so it turns pink. Then place it on the tile, under the burette.8. Open the tap to allow the acid to flow into the conical flask. As soon as the solution turns colourless turn the tap so no more acid can fall into the solution (this will make the experiment more reliable and accurate).9. Record the final burette reading.10. Subtract the starting burette reading amount from the final burette reading to find out how much acid was required to neutralise the solution. Record this result.11. Rinse out the conical flask, and repeat the same experiment another 3 times as the first one is just a rough titration.12. After all titrations are done for one sodium hydroxide solution, clean all equipment thoroughly with water.13. Repeat the experiment 4 times for the remaining Sodium Hydroxide solutions (B and C)During thi s experiment I had to read a burette twice (at step 6 and step 9), reading a burette can be quite difficult. This is the right way to read it-A meniscus is curve that is at the surface of the acid when is formed when it is in a burette. The volume is read at the bottom of the meniscus. You always read the burette where the bottom of the meniscus is. For example-It is important to record the results accurately in order to get factual results.Here are three tables for each antacid I used in my experiment.Results:Antacid ARoughTitration 1Titration 2Titration 3Final Burette Reading26.3026.1026.5025.90Starting Burette Reading0.000.000.040.01Total Amount of Acid24.3026.1026.1025.80Average: 26.00 cm3Antacid BRoughTitration 1Titration 2Titration 3Final Burette Reading38.0038.9038.4038.40Starting Burette Reading0.010.020.000.00Total Amount of Acid37.9038.7038.4038.40Average: 38.50 cm3Antacid CRoughTitration 1Titration 2Titration 3Final Burette Reading53.5052.5053.7054.60Starting Burette Read ing0.000.010.020.00Total Amount of Acid53.5052.4053.5054.60Average: 53.50 cm3For each antacid I repeated the experiment four times. The first one was always a rough titration. I did this to see if there is any problem with the results, and to see if everything is working precise. Then I can carry out the other 3 titrations correctly as I know that there will not be any problems with the equipment. Also I can compare the rough results to the other results to see if there are any outliers.Data Explanation:For each Antacid I worked out an average of all the experiments, excluding the rough titration.The average amount needed to neutralise the solutions were: A = 53.50 cm3B = 38.50 cm3C =Average: 26.00 cm3From the averages I can see that Antacid C was the strongest solution and therefore is the most effective, it was able to neutralise the most acid. This sodium hydroxide solution would be the best to treat indigestion.To work out the strengths of each antacid I can use this equation:Mo larity of Acid xVolume of acid from titration/ Volume of Sodium Hydroxide solution.Solution A: 1M x 26.00/25= 1.04MSolution B: 1M x 38.50/25= 1.54MSolution C: 1M x 53.50/25= 2.14MFrom this I can tell that Solution C is the strongest alkali.Also I would like to look at the variation from the results of each antacid titration compared to the average.Antacid AFrom this graph I can see that the average is closer to two results and much larger than the last titration. This may show that a mistake could have occurred during the 3rd titration.Antacid BMy results for the 2nd solution varied. Two results were the same and the other was much more. The average was reasonably close to all three titrations.Antacid CThe average of this antacid solution is the same as one of the titrations. The titrations show a pattern, the solution reading at the end increased every time.Scientific Explanations:Titrations: An acid-base titration is a method in chemistry that measures the concentration of an unkn own acid or base solution. It makes use of the neutralization reaction that occurs between acids and alkalis. A titration measures how much acid is needed to neautralise the alkali. Acid-Base titrations can also be used to find percent purity of chemicals.Indigestion: Indigestion (also known as dyspepsia) is a pain felt in the upper part of the abdomen underneath the rib cage. Indigestion occurs when there is damage of the mucous layer. Your stomach produces a strong acid that helps digest food and protects you against infection. A layer of mucous lines the stomach, oesophagus and intestines to act as a barrier against this acid. If the mucous layer is damaged, the acid can irritate the tissues underneath. It is caused by: not eating regular meals as acid levels can rise, smoking and excess drinking. The symptoms of indigestion are: pain in the abdomen, heartburn and loss of appetite. You could treat dyspepsia by using antacids. They can often relieve symptoms of indigestion by neut ralizing acid in your stomach. Examples of antacid brands include Rennie and Mucogel, and many of the popular antacid brands contain a mixture of more than one active ingredient. However some antacids can create some Side-effects such as diarrhoea and constipation. Also some antacids contain an ingredient called which forms a barrier that floats on the top the stomach contents to prevent reflux.Evaluation Conclusion:From my results and calculations I think my experiment went well. I did as much as I could to try and make the experiment fair and accurate however it was inevitable that a gap would be open for human errors. During my experiment my group always changed the person who was recording the amount of acid needed and the role of turning the tap when the solution turned colourless. This may have affected our results as different people observe things in different ways. Someone may have turned the tap too early or too late which would affect the outcome of our results. Also to make my results more firm, I could have repeated the experiment a few more times in order to get a range of results.Human error makes way for things such as, not rinsing out glassware properly, misreading the burette and not detecting the end point accurately. There are other methods that I could have tried out as well such as a pH meter. A pH meter is an electronic instrument used to measure the pH (acidity or alkalinity) of a liquid. A typical pH meter consists of a special measuring probe (a glass electrode) connected to an electronic meter that measures and displays the pH reading. This would have given me more accurate readings.However I think titrations was the best strategy out of all the methods I had tried. It was extremely accurate and only little mistakes could be made. Although I did find a few outliers during my experiment. The biggest outlier I found was the first titration of the whole expermint which was a rough one, the result outcome was 24.30cm whereas the other r esults were between 25.00-26.00. This may be because the equipment werent cleaned put properly or the results werent read accurately. To make my results even more accurate I could have redone them, however with such a small difference I did not feel that it was not necessary. If I wanted to have strong results I could repeat these experiments where there would not be any outliers whatsoever.In conclusion, I think I chose the finest method to find out which antacid is the best solution to cure indigestion according to the equipment which was available. I tested other strategies and came to a conclusion that they werent accurate enough. Using a burette and pipette, secured my results and made them extremely reliable. My experiment was carried out carefully and precisely in order to get a fair result. Overall I believe my experiment was triumphant, and by the end of it I found out which antacid successfully combats indigestion.

Tuesday, March 17, 2020

Monetary Policy and the Federal Reserve essays

Monetary Policy and the Federal Reserve essays Money doesnt grow on trees. How often has one heard that cliche? But if horticulture cannot produce dollars and cents, then how is money created? One rather flip answer might be that moneys value is created because the government says so. Despite the sarcasm inherent in this comment, there is a trace of accuracy to the statement. Money is essentially an empty thing, a placeholder rather than a substance of actual value. Once upon a time, the gold standard held sway, meaning that all U.S. funds were backed by gold held in the vaults of Fort Knox. However, this is no longer the case. The abandonment of convertibility of money into a commodity since August 15, 1971, when President Nixon discontinued converting U.S. dollars into gold at $35 per ounce, causing most other nations to follow suit, has made the U.S. and other countries' monies into fiat money-money that national monetary authorities have the power to issue without legal constraints. (Schwartz, 2002) To prevent the willy-nilly printing of money and inflationary growth, the Federal Reserve enforces certain constraints upon the circulation of money. For example, the Federal Reserve requires commercial banks and other financial institutions to hold as reserves a fraction of the deposits they accept. Banks hold these reserves either as cash in their vaults or as deposits at Federal Reserve banks. (Schwartz, 2002) This policy was put into place partially to prevent bank runs, or the phenomenon of people being unable to borrow money because the bank had lent such a wide percentage of available dollars to other patrons. To manipulate the amount of circulating currency in the economy, the Federal Reserve can either raise or lower the national reserve requirement for member banks. If banks must hold a higher level of funds in reserve, the banks will have less money to lend, thus the money su...

Saturday, February 29, 2020

Analysis Of Radicalisation And Extremism Criminology Essay

Analysis Of Radicalisation And Extremism Criminology Essay Radicalisation is a complex term which has different meanings and can be used in different contexts. To be radicalised does not necessarily mean that one has to resort to violence or terrorism. It is not a synonym to extreme religious teachings or activities either. Radicalism can be intolerant behaviour or intolerance towards the views of other people. It can be intolerance towards homosexuality, ethnicity, race, colour, religion. Being radical can be intolerance towards the western culture or Asian immigrants living in Britain as well. The US Southern Baptists do not recognise homosexuality as a valid alternative lifestyle (Kahn, 2006). The army of God, a Christian extremist group in the US murders doctors who practice abortion (Gray, 2007). A former Dutch immigration minister sought to deny asylum to lesbian, gay, bisexual and transgender Iranians, threatening to deport them back to Iran which imposes a death penalty on homosexual conduct (Human Rights Watch, 2007). Do the above examples not illustrate radical and extremist behaviour? Therefore Radicalisation can vary from having extreme views about something to intolerant behaviour towards certain people, to violent radicalisation which has severe consequences. For the purpose of this research we shall look into extremist radicalisation or violent radicalisation with religious or political aims. According to Precht (2007), â€Å"Radicalisation is a process of adopting an extremist belief system and the willingness to use, support, or facilitate violence and fear as a method of effecting changes in society†. In this definition we can see that a person is radicalised when they adopt an extremist belief system and perceive society as defective and aim to change it through non-violent or violent ways. There is a very fine line between extremism and radicalisation. According to Archbishop Desmond Tutu â€Å"extremism is when you do not allow for a different point of view; when you hold your own views as being quite exclusive; when you don’t allow for the possibility of difference† (Tutu, 2006). One could argue that there is nothing wrong with extremism or radicalisation, as it does not necessarily lead to violence but on the other hand the very fine line can easily be crossed over. However when extremism starts to have a political end, for example to force governments to the table of negotiation or to changes in policy it then converges into radicalisation (Davies, 2008). And when the willingness to use violence for a political or religious change combines with this radicalisation it can lead to terrorism. Radicalisation is a process where an individual adopts extreme political or religious ideas and goals, becoming convinced that the attainment of these goals justifies extreme methods (Ongering, 2007). In the context of this research we shall look into Islamist radicalisation or violent Islamism. Before we look into the literature we should not confuse the terms Isla m and Islamist. Islam is a religion and the follower of this religion is known as a Muslim not an Islamist. Islamist or Islamism is a term coined by the West to differentiate between Islam the faith or religion and Islamism as the ideology or political Islam.

Thursday, February 13, 2020

BusinessMGT Unit2 Assignment Example | Topics and Well Written Essays - 1500 words

BusinessMGT Unit2 - Assignment Example It is essential that effective technique should be selected based on an organization’s resources and needs. All business techniques of planning are effective, if they are implemented in a proper way and time. Organizations should build an organizational culture suitable for the planning technique before executing it. The organization has to opt for the planning technique that is flexible and most suitable for its business type. Planning and leadership is managed according to the goals of the organization. Objectives provide the organization with the direction of planning and actions. The main characteristic of objectives and goals is that they should be specific; they should indicate what the company wants to achieve. The objectives must be according to the mission statement. They should be realistic, achievable and motivating (Crow, 2006) Nestle is the world’s largest and leading food company with factories operating in almost all continents. Nestle is thoroughly dedic ated to food; it remains concerned about the quality of food and any problem related to nutrition. The main objective of Nestle is â€Å"to be recognized as the world’s leader in Nutrition, Health and wellness, trusted by all its stakeholders and to be the reference for financial performance in its industry† (Nestle, 2011). It wants to provide people with a variety of food, as well as better food so that they can live a better life. The leadership and trust provides people with good and healthy life. Its slogan â€Å"Good Food, Good Life† defines the ambition of Nestle. Over the years, Nestle has been achieving its goals. The reason behind its success is that it has accomplished what it strived for. The business principles that Nestle has set, help the company in achieving its goals. The company manufactures and markets the products in such a way as to create value that can be maintained over the long term. Nestle values it consumers. The consumers and the organ ization have developed a relation of trust. Without the trust of consumers, the company would not exist. The guidance to the employees in the form of principles has benefited the company and has ensured that highest standards are met. The professionalism and the responsible attitude of management is the reason behind the success of the company. The goals that were defined above are achieved by following the business principles. The principles are not followed by the employees only, but are followed by the top, lower, and middle management. Now the company is providing good life to people by supplying them with good food. The food includes everything from juices to dairy products and from dietary to infant food. References J. Crow, (2006), "What constitutes a good project goal statement?", http://www.projectkickstart.com/html/tips4.htm Nestle, 2011

Saturday, February 1, 2020

Customer Acquisition Report Information Essay Example | Topics and Well Written Essays - 2250 words

Customer Acquisition Report Information - Essay Example Some of the main factors under this include product, place price, and promotion. Building a strong brand is vital since it has psychological effect on the customers. The perception of customers towards a particular product dictates the number of sales that one will make. Conducting a marketing research before the introduction of a given product becomes vital. It assists a businessperson in obtaining information about the attitudes of individuals towards a particular product. Through a marketing research, one is able to know the strategy with which to approach the market. The introduction of new products in the market faces a number of challenges. This is due to some internal and external factors, which determine the success or failure of businesses. If the employees for instance do not have skills that ensure proper communication with customers, this may lead to increased losses for the company. Customers are retained by the quality of services they receive from a company. It is impe rative to note that marketing also plays an important role in acquitision of customers. It is the process through which a business information the customers about the products. In the following discussion, the introduction of iPhone 5 and acquisition of customers will be dealt with. Brief history of Apple Inc., which produces iPhone Started in 1976, this multinational company is one of the most successful, dealing with the production of operating systems and communication gargets. With its headquarters in California, the company has been able to have about 14 subsidiary companies throughout the world (Duhigg 23). In addition to that, it operates more than 393 stores worldwide to facilitate the sale of its state of art products. Apart from the production of iPhones and operating systems, the company also produces computers, macs, and iPods and currently seeks to introduce smart TVs. The company has been able to create more employment opportunities to the society members. The statisti cs released in 2012 indicated that the company had 72,800 permanent employees and thousands of others under temporal contract (Duhigg 23). In the same year, the company had total revenue of about $156 billion (Duhigg 24). This was unprecedented and attributed to increased sales of products particularly the iPhone 5, which was introduced in the same year. It is estimated that about 27.4 million handsets of this product were sold in 2012 (Duhigg 24). This was much higher than that of the closest rival Samsung Galaxy S 111 introduced the same time. Despite the success of the Apple Inc. there are various challenges threatening the stability of this business. Competition has been a major concern for the company. Apart from Samsung Company, which has been a major rival in the production of smartphones, others include Nokia, Huawei, and Motorola companies. The goods of these companies are of lower price compared to that of the Apple Inc. Introduction of iPhone 5 in my location It is a stat e of art smart phone, which runs on Apple operating system. It is a main rival to other smart phones produced by other companies such as Samsung and Huawei. Unlike the previous generations of this product, iPhone 5 is not only lighter but also thinner making it more convenient and portable. This may explains the high number of sales in 2012. Despite this though, the sale of this phone is significantly lower in my location owing to the perception of

Friday, January 24, 2020

Analysis of Superstitions :: Exploratory Essays Research Papers

Superstitions Mysterious happenings are all around us today. I personally have done extensive studies in the histories of many of these superstitions, from the common to the absurd. Science tends to claim that all superstitions are pointless, and, in some cases, I agree, such as the fear of black cats, but the fact of the matter is that some superstitions come from a rich pre-Christian background. Many superstitions have been doubted since the rise of science, but it has been said that "In spite of advances and science, people are still superstitious." First, today's superstition is yesterday's magick; second, many people still practice the old ways; and finally, even common people practice. Superstitions are a part of our everyday lives and always have been. First, today's superstitions are yesterday's magick. Magick is the term practitioners use to describe the direct but subtle influence over reality; magic is a term for stage tricks. Long before the age of science, magick was a common element in every religion, even Christianity. Even science in its beginning, was based on old magicks like numerology, begun by Pythagoras, and alchemy. Since then, we have several leftovers from the old ways, my favorite of which is knocking on wood. The ancient Celts (pronounced Kelts) began this practice as a way of thanking the wood fairies, who were seen as mostly responsible for good luck. Today, when speaking of one's good fortune, it is common to knock on wood, though most people do not know why. Despite science's attempts to turn the old ways into useless or forgotten superstitions, the remnants of them are still around. Second, many of us still practice magick, roughly 10,000 in America. Collectively, the religion is known as Wicca, though not all Wiccans practice magick, and not all of those who practice magic are Wiccan. Obviously, the scientific community would prefer to believe that we are either insane, delusional, or con-artists, but none of that is true. I have seen magick work and have done it myself. In fact, my favorite way to gain the trust of a new friend is by granting him or her one wish, as long as the wish is not too grand; as I said before, magic is subtle.

Thursday, January 16, 2020

One Step Home Brewing Kit Essay

There are a lot of home brewing kits available in market but all have a typical problem associated with it. We have come with a new â€Å"One Step Home Brewing Kit† based on our patented technology. Soon we plan to launch it in market. We did a market research for such product and gained a lot of valuable information. Based on all those observations we have come with the following plan. We would be operating through internet instead of setting up a shop for it, at least for the initial phase. Not only it reaches to more people but also is more convenient to operate. We won’t run the website ourselves but would outsource to a separate company. Our research shows that outsourcing would be cheaper. We have finalized our hosting company and hosting plans. The initial one time cost comes to be around $10,000/-. Regarding our financials For the first month our primary target is set our infrastructure right. We need to get comfortable with the setup, optimize our settings. So, for the first month we won’t be spending much on advertising but would mainly focus on our acquaintance and word-of-mouth publicity to get our customers. We have kept a modest sales target of 100 units. Each kits selling price would be $30/-. Cost of revenue is assumed to be 45% of revenue. Biggest expense during this time would be of setting up the website which includes one time cost of website hosting, web designing and taking photographs of our product. The setting up process will take around 20 -25 days. From the last few days of the month we would increase our advertisements and also would put user experiences of our product on the website. Rough estimate shows a loss for the first month which is very well expected at the beginning of a business firm. In the second month we expect sales of around 500 units. This increase is expected due to increase in our advertising and the positive feedback given by our customers for our product. We ourselves have no doubt that our product is best and hence expect strong positive atmosphere for our product in the market. To cater to this increasing need we would need to purchase a new computer and hire an operator for that. The New system’s cost is put in office equipment expenses field. This would increase our staff from 1 to 2. We also would have to work in those positions to curtail our staff requirements For the 3rd month we expect sales of around 800 units and hope to induce a new staff and a new computer to keep up with our increasing customer visits and their database. We hope to reach our break even point by the end of 3rd month. For the next quarter we hope to keep a calm speed and again check our system and get the work boundaries of everyone more finer. We would take one more employee at non technical position. For 3rd quarter we again expect a rapid increase in our sales due to the previous quarter’s corrective steps. We will introduce a new staff in our team to concentrate specifically on our advertising. So our advertising cost reaches an all time high. For final quarter we hope to keep up this good trend. For 2nd year we will try to outsource some of our processes like dispatching, packing etc. so that we focus more on our core competence i. e. our product. We will also try to start R&D around our product. This will help us bring out some new product. We will first be looking to bring some product that would complement our product. Also we may venture out in new areas if they seem perfect for our conditions. Our Rent is going to increase by 20% In 3rd year we will double our infrastructure. This may be for our new product or to keep the increased volume of sales of our existing product. This year we will definitely setup our R&D if they are not setup to the full extent in the second year. As the world is progressing fast in technology fields and future would hold golden days for technology products. We will surely bring some product in this domain. Our core product would of course be always our focus and we will always try to better it. As we move past the expected milestones we would surely be getting more experienced and will fine tune our expenses, Mobilize our staff to specific positions. This is our plan till now and we hope to surpass it every month, quarte